Victorian Tile Cleaning Archives - South Cumbria Tile Doctor

Victorian Tiled Floor Renovation Cartmel

Late Victorian Tiled Hallway Floor Impacted by Subsidence Renovated in Cartmel

Pictures below are from a Victorian tiled floor we recently renovated in the South Cumbrian village of Cartmel. The house had experienced a bit of subsidence in the past, which had settled long ago, but left a series of cracks running through from the front door to the staircase.

Victorian Floor Before Renovation Cartmel Cumbria

The owner of the property had decided to get the floor renovated and wondered if anything could be done to improve the cracks and reset several tiles which had become loose. Having restored numerous period floors previously I was confident all these problems could be resolved and the floor renovated to a high standard.

Repairing and Cleaning a Victorian Tiled Floor

Before cleaning the floor needed to be secure so the subsidence issues had to be resolved first. I had to take out several loose tiles, rake out the old adhesive and grout and then reset them with fresh rapid setting adhesive and grout. Then to resolve the cracking a colour matching grout filler was pushed into the gaps and this disguised the cracks quite well.

Victorian Floor During Renovation Cartmel Cumbria

Once the repairs had set the cleaning process could begin starting with the application Tile Doctor Remove and Go worked in with a coarse 200-grit milling pad. Remove and Go is a powerful tile cleaning product that as the name suggests will remove all sorts of coatings such as sealers.

Small hand-held Diamond blocks were used for cleaning up the Yellow tiles, these tiles contain sand in the clay to give it the colour as such they are always the most porous and most difficult to get clean. However we have found using a set of handheld Diamond blocks of different grits we can open up the pores of the clay, release the ingrained dirt and then close the pores ready for the final clean and seal.

The final clean involves giving the floor an acid rinse for which I use Tile Doctor Grout Clean Up. This final step removes old grout smears, clay resin and also counters the use of alkaline cleaning products such as Remove and Go leaving the floor with a neutral ph. Lastly it etches the clay slightly resulting in a stronger bond with the sealer, improved finish, and better performance.

Sealing a Victorian Tiled Floor

To seal the floor a thin coat of X-Tra Seal was applied, this is an Oil based Impregnating sealer that soaks into the pores of the clay tile protecting it from within and helping the colours to pop out. Additional this sealer is fully breathable which is an important consideration when dealing with a floor laid in the Victorian era without the benefit of a damp proof membrane.

Victorian Floor After Renovation Cartmel Cumbria

As usual before leaving we like to advise the customer on how to maintain the tiles using a compatible cleaning product such as Tile Doctor Neutral Cleaner. This aftercare product has a neutral ph. which won’t impact the sealer like many of the standard bleach based products you find in supermarkets.

Professional Tile Repairing, Cleaning and Sealing for a Victorian Tiled Floor in Cartmel

Late Victorian Tiled Hallway Floor Impacted by Subsidence Renovated in Cartmel Read More »

Victorian Tiled Floor Renovation Ulverston

1860s Victorian Mansion Flooring Restored in Ulverston

Detailed below is the restoration of several original Victorian tiled floors at an older building in Ulverston. The large property was being fully redeveloped after being vacant and unoccupied for the last fourteen years which left it in a bad state of repair.

Damaged Victorian Floor Before Restoration Ulverston

The development company had already spent a significant amount of time and money turning this 1860s Victorian Mansion into 7 modern apartments. Fortunately, they had decided to keep as much of the original features as possible which included the amazing Victorian Floor tiling in the main hallway.

Physically the Victorian tiles were in good condition apart from two areas near the doors where some damage had been done to them in the past. The area measured 50m2 approximately so I could see it would need two Tile Doctors over four days to repair the damage and fully restore the tiles.

Deep Cleaning a 50m2 Victorian Tiled Hallway

The first day was mainly about deep cleaning the whole area using Tile Doctor Remove and Go worked into the floor using a 200-Grit Diamond pad fitted to a buffing machine. This process releases sediment, dirt and old coatings from the tile which is then extracted using a wet vacuum. It’s worth considering that you can’t really clean these types of tiles properly without a wet vacuum, a mop and bucket simply doesn’t cut it also mopping an area this size simply takes too long.

The next stage of the cleaning process was to give the floor an acid wash using another Tile Doctor product called Grout Clean-up which has an acidic base. This process neutralises the alkaline cleaning product used earlier and microscopically etches the clay tile to achieve a better boned with the sealer which will be applied later. This acid also helps in the cleaning process and will counter any efflorescent salt issues that are common problem with floors of this age. Once removed with the wet vacuum the floor is rinsed and extracted again to ensure any residue is removed and the floor is as dry as possible.

Repairing a Victorian Tiled Hallway

Whilst the main floor was left to dry, we proceeded to work on the damaged and missing tiles. This is one of the advantages of using a Tile Doctor for work like this as you will find other tile cleaning companies won’t offer a Tiling service. I must say thought we only offer tiling as part of a larger “Restorative Cleaning” project which is something we specialise in.

Damaged Victorian Floor During Restoration Ulverston

Damaged Victorian Floor After Restoration Ulverston

Sealing a 50m2 Victorian Tiled Hallway

Once the Tiling was completed and the Tiles had dried out (24 hours later) we returned to seal the floor. For this a single coat of Tile Doctor X-Tra seal was applied, this was chosen for its durability and the fact that its fully breathable which is important feature for floors of this age without a damp proof membrane. It’s an oil resin formula which makes it thicker than a solvent-based sealer so in most cases only one coat is required, it can also be used externally.

It takes several hours for the sealer to fully dry and around 24 hours to fully cure so the photographs I took don’t really do the sealer justice. Unfortunately, I couldn’t wait around that long.

Professional Restoration of Victorian Mansion Flooring in South Cumbria

1860s Victorian Mansion Flooring Restored in Ulverston Read More »

Victorian Floor Renovated in Windermere Lake District

6-inch Red Victorian Floor Tiles Renovated in a Windermere Kitchen

1 Comment / Victorian Tile Cleaning, Windermere Tile Cleaning / Heidi Taylor

These old Red Victorian floor tiles in the kitchen of a property in Windermere might appear to be Quarry Tiles on first inspection however they are not. One way of telling is to look at the grout lines, modern quarry tiles are always set with at least 4mm grout joints (sometimes a lot more). Victorian floor tiles are always rebated together as close as possible with only a millimetre of grout being put in place but as grout wasn’t around over a 100 years ago it was either white limecrete or grey screed cement which was used.

Old Victorian Period Red 6 inch floor tiles before cleaning in Windermere

It’s important to know what you are working on as standard Victorian tiles have no sand fillers in the clay unlike the much thicker contract and standard quarry tiles; these red Victorian tiles are pure clay all the way through which means we can go much deeper on the cleaning.

The floor had previously been covered in carpet for many years and to secure it and the underlay to the tiles a strong adhesive had been used. A self-levelling cement compound had also been applied and lastly there was red paint to deal with.

Cleaning a Victorian Tiled Kitchen Floor

Before cleaning the first task was to run a line of silicone around all the kitchen unit edges. These are often made of MDF and not solid wood and any amount of water will blow the MDF within 5 to 10 minutes of contact. Clear silicone is used for this and left in place as it’s a great way to protect the units even from the water used in daily mopping of the floor tiles. Once that had been applied the units were then covered with a protective plastic sheet that was secured in place with tape.

To tackle the red paint and other contaminates, Tile Doctor Oxy Gel was applied and scrubbed into the floor, this softens the paint and worked well on the remnants of carpet underlay that were still firmly attached to the tiles.

Old Victorian Period Red 6 inch floor tiles during cleaning in Windermere

The cement screed was mostly scraped off and anything left over was loosened using Tile Doctor Acid Gel worked in with a buffing machine fitted with a black scrubbing pad. Some edging work was needed, and this had to be done by hand with small brushes. To finish off the floor was rinsed with water and a wet vacuum was used to extract all soiling and residue.

Sealing a Victorian Tiled Kitchen Floor

With the cleaning finished we left for the day and let the floor dry off overnight. The use of gel cleaning products ensured water was kept to a minimum and allow for a quicker drying time.

Next day the tiles were sealed with the tiles two coats of a breathable sealer called Tile Doctor X-Tra Seal. This sealer is an oil-based product that adds structure to the tile and does a great job of lifting the colour in the clay tile. X-Tra Seal is also fully breathable and will cope well with any moisture rising through the floor. This is always a concern with old floors like this one that don’t have the benefit of a damp proof membrane.

Old Victorian Period Red 6 inch floor tiles after cleaning in Windermere

You will notice some patchiness on the after pictures of the clay tiles after the sealer had dried. With old floors like this you never know its full history and what might have been used on it before, in this case I suspect the patchiness is down to the miss use of a chemical cleaning product in the past, probably something with a strong acid base. These tiles are generally not acid sensitive but constant use of acid on any surface will deteriorate the finish as it opens the pores in the clay and lets the dirt in. Once the pores are open on a clay tile, they won’t close so we resolve this by using X-Tra seal and filling any cavities with oil.

Once done the floor looked so much cleaner and brighter and the new sealer will protect it from ingrained dirt well into the future.

Professional Restoration of a Victorian Tiled Kitchen Floor in Cumbria

6-inch Red Victorian Floor Tiles Renovated in a Windermere Kitchen Read More »

Victorian Period Floor Restoration Beetham

Red and Black Victorian Tiled Period Floor Restored in Beetham

1 Comment / Arnside Tile Cleaning, Victorian Tile Cleaning, Work by Category, Work by Location, Work History / Heidi Taylor

The floor of this property in Beetham had been covered with carpet and underlay for what the client believed was between 25 and 30 years. Now under new ownership the carpet had been partially removed to reveal an original Red and Black Victorian tiled floor hidden underneath. Before considering other options, the customer wanted to investigate having it renovated and preserving as an original period feature so they called their local Tile Doctor to see what could be done.

Classic Red Black Victorian Period Floor During Restoration Beetham

We have a long history of successfully restoring old Victorian floors back to their original state so did not anticipate having any issues. Having said that however you can never be sure what your going to find with old floors like these so where possible we like to visit the property to run a few tests before quoting. Older properties do not have a damp proof membrane therefore damp was an obvious consideration and so before running any cleaning tests we took a few damp readings from the floor. We worked out a quote which the client was happy with and we set a date for the restoration.

Cleaning Repairing a Victorian Tiled Kitchen Floor

To start with we had to hack up the old black underlay, which had been glued down to the floor, this was hard work but had to be done. We then worked on removing the remnants of the underlay and started cleaning the whole floor with a weighted buffing machine, a black buffing pad and Tile Doctor Remove and Go to breakdown the glue.

Once the majority was removed, we went a bit harder with the deep clean as it still didn’t look clean enough so we switched to milling pads, starting with a 100-grit, then 200-grit and finished with a 400-grit diamond pad. The soiling was rinsed away and then the floor was given and acid wash using Tile Doctor Acid Gel. This last step is designed to neutralise any alkaline salt issues, aka efflorescence, that may be have been trapped in the tile over the years.

Sealing a Victorian Tiled Kitchen Floor

When choosing a sealer for a floor with no damp-proof membrane you have to be aware of the need for moisture to rise through the floor and evaporate at the surface. The moisture readings we took on our first trip out to the property did indicate damp around the edges of the room even after being allowed to dry for quite a while.

To allow for this you need to use a fully breathable sealer, so we advised the use of Tile Doctor Colour Grow. This sealer also enhances the natural colours and will protect the tile from ingrained dirt by impregnating the tiny holes in the clay tile with sealant. Using a non-breathable sealer on a floor like this would prevent it from breathing and result in rising damp as the trapped moisture is forced out to the walls. Worst case tiles can be destroyed by the rising salt issues.

Classic Red Black Victorian Period Floor After Cleaning Beetham

It was quite a big floor and it took longer to clean than we had planned for. The client wanted the kitchen fitted before being sealed in case the fitter made a mess, so we returned later to seal the floor with four coats of Tile Doctor Colour Grow. Unfortunately, it didn’t occur to me take photos afterwards so the pictures on this page are before it was sealed.

Before leaving we discussed on-going cleaning and so I recommended Tile Doctor Neutral Cleaner which having a neutral Ph will not prematurely erode the newly applied sealer. Its mild enough to use daily and leaves a nice fresh fragrance.

The client was very pleased with the newly restored floor and glad they could retain the period feature of the Victorian tiles which was much more in keeping with the property than the awful carpet that had been laid previously.

Professional Restoration of a Victorian Tiled Kitchen in Lancashire

Red and Black Victorian Tiled Period Floor Restored in Beetham Read More »

Victorian Tiled Entrance Floor Before and After Restoration in Prizet Kendal

Restoration of a Victorian Tiled Floor in Prizet, Kendal

1 Comment / Kendal Tile Cleaning, Victorian Tile Cleaning, Work History / Heidi Taylor

The photos below are of a 1.7 metre by 3 metre Victorian tiled floor at the entrance to a property in Prizet, south of Kendal. As you can see the hallway and porch was in a poor state due to old age and neglect. Some tiles were cracked, missing and stained with cement, and what I suspect was carpet adhesive. One of the tiles had a four-inch hole down to the cellar where a soil pipe was installed previously when the room was used as a downstairs W.C. The client was doubtful that we would be able to restore the floor but thought it would be worth contacting us just in case.

Victorian Tiled Entrance Floor Before Rebuild Prizet Kendal

I visited the property to take a proper look and found their description of the floor was accurate and clearly overdue some serious attention. I also noticed that some point in the past cracked tiles had been removed and replaced with cement. However, I was confident the floor could be restored and gave them a price for the restoration which they were happy to proceed with.

Repairing a Victorian Tiled Hallway Floor

Work started by rebuilding the worst part of the floor which would require the services of my partner Russell. This involved removing the existing tiles, then preparing the concrete base which needed to be level and smooth before we started tiling.

Victorian Tiled Entrance Floor During Rebuild Prizet Kendal

We had previously managed to source very similar tiles which would be needed to replace those that were missing or damaged. Once the floor was prepped, the replacements were cut to fit taking care to ensure they matched the original pattern. Once cut they were fixed in place with flexible adhesive. We recommend the use of flexible floor adhesive on old floors due to the potential movement and the flexible floor adhesive doubles up as a grout as well. The floor was then left overnight to dry.

Deep Cleaning a Victorian Tiled Hallway Floor

On day two the floor was deep cleaned using a 100-grit resurfacing pad followed by a 200-grit pad and then a 400-grit burnishing pad. The pads are attached to a rotary machine and the floor is rinsed with water and the soil extracted with a wet vacuum in-between.

We then finished the clean with an acid rinse using Tile Doctor Grout Clean Up. This is needed to remove the cement stains from the surface of the Victorian tiles and neutralise any potential efflorescent salt issues in the tiles. Another advantage is the acid slightly etches the tiles making a better bond with the sealer.

The floor was given another rinse with water and then the wet vacuum was pressed into surface again to extract the fluids and get the floor as dry as possible before leaving for the day.

Sealing a Victorian Tiled Hallway Floor

We returned on the third day and first checked the floor was fully dry using a moisture meter. Four coats of Tile Doctor Colour Grow were applied to achieve a strong enduring seal that will cope well with the traffic coming through the entrance.

Colour Grow is a colour intensifying sealer that provides durable surface protection to the tiles, but at the same time allows the surface to breath which is important in a floor such as this where no damp proof membrane is present. The results speak for themselves I was particularly happy with the area where we had repaired the hole, it was barely noticeable.

Victorian Tiled Entrance Floor After Rebuild Prizet Kendal

Many thanks to my customer for sending over the before photos and for leaving the following testimonial.

“Great restoration job done on our Victorian hall and porch tiles including replacing broken tiles and cleaning. Now looking better than ever. Russell was very professional and knowledgeable. Nicola F. Kendal”

Professional Restoration of a Victorian Tiled Hallway in South Cumbria

Restoration of a Victorian Tiled Floor in Prizet, Kendal Read More »

Geometric Victorian Hallway Tiled Floor Before After Renovation Sedbergh

Geometric Victorian Tiled Hallway Renovation in Sedbergh

1 Comment / Sedbergh Tile Cleaning, Victorian Tile Cleaning, Work History / Heidi Taylor

This beautiful Geometric Victorian Tiled Hallway at a property in the small Cumbrian town of Sedbergh had been covered by carpet and then Vinyl beneath the carpet. Far from causing an issue with the floor however it had protected the beautiful old tiles, but they needed a deep clean and seal. The client really wanted to make the most of the character features of the property and the hall floor was their first priority.

Geometric Victorian Tiled Hallway Before Cleaning Sedbergh

I discussed with the client the process of cleaning and we agreed a quote for the work, arranging a date for the work to be carried out later in the month. If you have never been Sedbergh is well worth a visit, it sits just within the Yorkshire Dales National Park at the foot of the Howgill Fells making it very popular with walkers.

Cleaning a Victorian Tiled Hallway Floor

The floor had a lovely decorative tile border that ran along the perimeter of the hallway however some damage had occurred when fitting central heating pipers many years earlier. There were also small holes around the edges that I suspect were used to secure the carpet gripper. To resolve this my first task was to replace the damaged tiles and fill the small holes with grout in a matching colour.

Once the repairs had set, I started the cleaning process with a coarse 200-grit Diamond pad followed by a 400-grit pad which were run over the floor using a weighed buffing machine. Only water is used during this process to add lubrication, no chemicals are needed and once done the floor is rinsed with water and the slurry removed with a wet vacuum.

The corners and edges which were are not accessible with the machine had to be done by hand, so we used small burnishing blocks for these. The Green block is great at getting the dirt off the tiles, but leaves the pores of the clay open, so this needs to be finished with the Black 100, Red 200 and Yellow 400 Diamond Block used in sequence which then matches the pores of the clay tiles in the rest of the floor.

We finished the clean, with a light acid rinse using Tile Doctor Grout Clean-up, left on the surface for no more than 5 minutes before rinsing and extracting. This process further cleans the floor and counters any potential efflorescence issues by neutralising alkaline salts in the floor. This is a common problem with old Victorian tiles which don’t have a damp-proof membrane.

Sealing a Victorian Tiled Hallway Floor

The floor was left to dry out overnight and the next day I came back to inspect the floor and make sure it was dry so it could be sealed. Usually one night to dry is fine during the summer although in the winter sometimes it takes two or even three days. Sealers don’t cure well on damp floors resulting in a patchy appearance so before sealing we always check the floor is fully dry with a damp meter in several areas. Only once we are happy that the moisture readings in the floor are below a certain level do go ahead and apply a sealer.

Geometric Victorian Tiled Hallway After Cleaning Sedbergh

To seal and protect the Victorian tile, a couple of coats of Tile Doctor Colour Grow were applied to the floor. Colour Grow is a fully breathable, colour enhancing sealer which ticks a lot of boxes for this type of floor as old floors don’t have a damp-proof membrane fitted. This is an important consideration as moisture will be also to rise through the tile from the subfloor and not get trapped underneath where it could spread to the walls. Other types of sealer such as acrylic, wax, polishes etc don’t last long if there is dampness in the floor. Tile Doctor Colour Grow copes well in these conditions and can be used in wet rooms, shower cubicles and external patio areas so its’s more than suitable for a slightly damp floor which is often the case with a Victorian base.

Professional Restoration of a Victorian Tiled Hallway in South Cumbria

Geometric Victorian Tiled Hallway Renovation in Sedbergh Read More »

Victorian Tiled Hallway Before After Restoration Ulverston

Cream and Black Victorian Hallway Floor Restoration in Ulverston

1 Comment / Ulverston Tile Cleaning, Victorian Tile Cleaning, Work History / Heidi Taylor

This property located near the pretty market town of Ulverston was built in 1874 as inscribed on the front of the building. The Victorian Tiled floor comprised of Cream and Black tiles was original from when the house was built so that made the tiles at least 145 years old, in fact this was one of the oldest Victorian tiled floors I have ever worked on.

Cream Black Victorian Hallway Floor Tiles Before Restoration Ulverston

The floor was in good condition for its age but had experienced problems with broken and loose tiles around two of the door thresholds which is a common problem with floors of this age. Unfortunately, those tiles had been lost over the years and now the customer wanted this part of the floor rebuilding as part of the restoration. Fortunately, these tiles are still popular so finding suitable replacements wasn’t a big of a challenge as you might think.

I discussed with the client what needed to be done and after finding a suitable supplier for the replacement tiles was able to produce a quote which was accepted, and we agreed a price for the work.

Repairing a Cream and Black Victorian Hallway Floor

My first task was to rebuild the areas of broken and missing tiles. For the larger areas I mapped out a suitable pattern and set about cutting the replacement tiles to fit. A thick bed of flexible rapid set floor adhesive was applied to the floor and the replacement tiles bedded into the old cement base. Once the adhesive had hardened the tiles were grouted, cleaned-up and left to dry.

There were several areas that needed this treatment, so the work took some time to complete.

Cream Black Victorian Hallway Floor Tiles During Restoration Ulverston

Cleaning/Repairing a Victorian Tiled Hallway Floor

Returning the next day, I first checked that the replacement tiles had set and that there were no further problems that needed addressing. All was well so I began cleaning the floor using a 200-grit followed by a 400-grit Diamond pad fitted to a weighted buffing machine running at slow speed and lubricated with water. The floor was rinsed with water after each pad and then the soil extracted using a wet vacuum.

The floor was then given an acid wash using Tile Doctor Grout Clean-Up, which at this stage acts in two ways for these old floors:

1. The Tile Doctor Grout Clean-Up product is made from Phosphoric Acid (not a brick Acid, which is a lot cheaper, more widely available but too strong for use on tile.) The acid we use works with us not against us and gives us time to change the pH of the floor to a slightly acidic pH. This is important on old floors like these where no damp proof membrane has been installed and it’s important to counter any alkaline salts in the floor which could lead to efflorescence later.
2. The sealer will bond to the surface a lot better when it has had this treatment and as a result you get a sharper cleaner finish.

Once done the floor was given another rinse and extraction with water and the wet vacuum and then left to dry out for a few days,

Sealing a Victorian Tiled Hallway Floor

We returned as promised to seal the whole floor using a couple of coats of a breathable colour enhancing sealer called Tile Doctor Colour Grow. As you can see form the pictures this really brought the hallway floor to life. Colour Grow works from the inside by occupying the pores in the tile and will protect it from ingrained dirt staining going forward.

Cream Black Victorian Hallway Floor Tiles After Restoration Ulverston

It’s very important for a customer to use the correct cleaner after having there tiles cleaned and sealed professionally as using the wrong product can prematurely degrade the sealer. As a result, we recommend Tile Doctor Concentrated Neutral Tile Cleaner, its pH balanced and will not upset the sealer, thus getting maximum longevity out of the whole process.

Professional Restoration of a Victorian Tiled Hallway in South Cumbria

Cream and Black Victorian Hallway Floor Restoration in Ulverston Read More »

Small Victorian Tiled Vestibule Before After Cleaning Kendal

Restoring and Cleaning a Victorian Tiled Vestibule in Kendal

1 Comment / Kendal Tile Cleaning, Victorian Tile Cleaning, Work History / Heidi Taylor

I often get asked to do small jobs as well as large kitchens, conservatories and hallways, and there is something especially satisfying about restoring a small entrance like this lovely Victorian tessellated tile floor. The property was in the historic market town of Kendal just to the south of the Lake District and famous for making Kendal Mint Cake.

Being at the entrance to the property the floor had seen some wear over the years and the once beautiful colours in the original tiles had become dull and dreary, and some of the smaller tiles along the edge of the floor had become loose over the years and were now missing. I was asked to repair the damage, clean the floor and restore the colours to their original glory!

Small Victorian Tiled Vestibule Before Cleaning Kendal

Deep Cleaning an Intricate Victorian Tessellated Tile Floor

My first task was to thoroughly clean the tiles and given these old Victorian floors have no damp proof membrane I was wary of potential damp problems which can be exacerbated by the excessive use of water. I decided the best approach would be to apply a coarse Tile Doctor 200-Grit Milling Pad fitted to a slow speed Victor burnishing machine. To lubricate the process, I used 500 ml of water and then added a little more as needed. I carefully went over the whole floor, then vacuumed up the excess water which was now saturated with dirt and grime!

I then went over the whole floor again, replacing the coarse Milling Pad with a Black scrubbing pad. This is designed to deal with heavily built up grime and dirt. I also applied Tile Doctor Acid Gel, a specially formulated PH1 blend of Phosphoric and Hydrochloric acids. This slow release gel works by breaking down any mineral salt deposits that might have built on tiled surfaces up over the years and removes grout smears. The final stage in this part of the project was to scrub the floor with a deck brush, rinse with water and extract immediately with a wet vacuum to leave the floor as dry as possible.

Small Victorian Tiled Vestibule After Acid Wash Kendal

Repairing a Victorian Tiled Vestibule Floor

Once the tiles had been deep cleaned I moved on to repairing the floor. Reproduction tessellated tiles in a design like this one can cost anything up to £300+ per square metre, so restoration is nearly always a cost-effective solution. It is, however, a precise process. The original floor would have been laid by highly skilled tilers who had to accurately position each element of the intricate mosaic pattern. The grout lines were also very fine to allow for tiny dimensional differences without spoiling the beautiful pattern.

Sometimes new tiles can be a shade lighter or darker than the original tiles which are usually well over 100 years old! I always explain this to customers before taking on a job like this because sometimes it is just not possible to find an acceptable match and it is then the customer’s choice whether or not to go ahead. In this case, luckily, I was able to find replacement tiles that were going to work, so I took out all the damaged tiles and carefully replaced them with new ones.

Small Victorian Tiled Vestibule During Repair Kendal

The last stage for that day was to carefully grout the restored areas to secure the tiles and then clean off the excess grout haze. I left the floor over night to dry out completely.

Sealing a Victorian Tiled Vestibule Floor

The next day I checked the floor for damp with a damp meter as too much moisture in the floor can affect the sealer. All was well, so I sealed the now clean and restored floor with Tile Doctor Colour Grow which is a colour intensifying sealer that brings out the amazing colours in the tiles. The sealer will provide durable surface protection and Colour Grow is what we call a breathable sealer that will allows any damp or mineral salts to rise up through the tile. The acid wash we gave the floor during cleaning should counter any efflorescence salt issues however if they do appear they can be easily washed off with clean water.

Small Victorian Tiled Vestibule After Cleaning Kendal

This may have been a small vestibule, but the restored floor now makes a real statement as you enter the customer’s house!

Professional Restoration of a Victorian Tiled Vestibule in Kendal

Restoring and Cleaning a Victorian Tiled Vestibule in Kendal Read More »

Victorian Tiled Hallway Before After Restorative Clean in Kendal

Original Victorian Hallway with Loose Tiles Restored in Kendal

1 Comment / Kendal Tile Cleaning, Victorian Tile Cleaning, Work History / Heidi Taylor

A customer who lives in Kendal recently called us out to examine their Victorian tiled hallway which when walked upon, sounded like it was a making a crunching noise. This may seem like an odd phenomenon, but it can be reasonably easily explained. These tiles, being made of Victorian-style encaustic cement, are very hard-wearing. However, the cement screed upon which they were laid had lost its bond with the tiles and the tiles were now loose.

Most other types of tile would crack under the pressure of being walked upon, but since Victorian tiles are quite small and hard-wearing, they don’t seem to suffer this problem. Instead, they just make this crunching noise when walked upon.

So, what would we need to do to resolve the situation? In theory, it should be the simple matter of taking up the loose tiles and relaying them. Yet this takes a lot of preparation, including removing the old cement from the back and sides of the individual tiles and then smoothening the floor so that the tiles can be re-laid flat. This is easier said than done with a floor of this age.

Victorian Tiled Hallway Being Relaid in Kendal

Repairing and Cleaning Loose Victorian Tiles

We began the restoration by lifting the loose tiles, cleaning the old cement off and then re-laying them using a suitable tile adhesive. Once the adhesive had set, we grouted the tiles with a grout that matched the original.

Victorian Tiled Hallway After Being Relaid and Grouted in Kendal

The floor was left to set overnight, and we returned to the property the next day. The floor was checked and then we carried out a full deep clean of tiles using Tile Doctor Pro Clean, our go-to cleaning product for tile, stone and grout. The product, which is alkaline-based, was worked into the tiles using a black buffing pad fitted to a rotary machine.

In some of the harder to reach areas and corners of the room – those which the buffing rotary machine struggles to reach – we used diamond-encrusted handheld blocks to grind away the stubborn dirt and stains.

The soiled cleaning solution was rinsed off the tiles with water and extracted using a wet vacuum to get the as much moisture off the tiles as possible.

Sealing Victorian Tiles

After the cleaning process was complete, we left the floor for another few days to dry off completely. A suitable drying period is especially important for Victorian tiles, since most of these old properties do not have a damp proof membrane installed.

We then returned to seal the tiles with several coats of a breathable, impregnating sealer called Tile Doctor Colour Grow that not only protects it also enhances the natural colours in the tile. Now, much to the customer’s pleasure the tiles are fully functional again with there’s no crunching noise when you walk on them. They also look amazing as well.

You will see in the photos below the level of work that goes into a job like this but, as this is an original Victorian floor, a restoration will add great value to the house upon re-sale.

Victorian Tiled Hallway After Full Restoration in Kendal

Professional Restoration of a Loose Victorian Tiled Hallway in Cumbria

Original Victorian Hallway with Loose Tiles Restored in Kendal Read More »

Victorian Hallway Before After Cleaning in Ulverston

Victorian Tiled Floor Cleaned and Sealed in Ulverston

1 Comment / Ulverston Tile Cleaning, Victorian Tile Cleaning, Work History / Heidi Taylor

Ulverston is one of several historic market towns in Cumbria which has some excellent views of Morecambe Bay and the Southern Lake District. It is also home to some lovely old properties, including one that I visited recently to provide some repairs, cleaning and sealing for a Victorian tiled floor.

Although the floor was in good condition overall, the tiles were starting to loosen in some areas because the grout had come adrift and needed to be replaced.In fact, several tiles had broken as a result of this and so they would need to replaced too.

Victorian Hallway Before Cleaning in Ulverston

Cleaning a Victorian Tiled Floor

As I’ve mentioned, the floor had been well maintained, but I opted in any case to give the tiles a routine clean with our reliable high alkaline product, Tile Doctor Pro Clean, scrubbed in using a pad fitted to a rotary machine. This helped to remove any debris and dirt left over on the tiles.

After the initial clean I proceeded to replace the broken tiles with matching reproduction Victorian tiles, as well as the grout in the areas where the tiles had loosened.

Sealing a Victorian Tiled Floor

After finishing the cleaning and repair processes, it was time to seal the floor with a combination of sealers.

To do this I firstly applied one coat of Tile Doctor Colour Grow, which is an impregnating, colour intensifying sealer. We find that by applying a base coat of Colour Grow we can lock out the damp that can come through from underneath as many old floors don’t have damp proof membranes fitted, unlike many modern floors. What’s more, acrylic polymer sealers such as Tile Doctor Seal and Go do not respond well to a damp environment.

Once the Colour Grow had been applied and had dried completely, I applied five thin coats of Seal and Go to add further protection and a quality sheen finish. This sealer is also fully breathable and allows Vapour Moisture Transmission (VMT).

Victorian Hallway After Cleaning and Sealing in Ulverston

The finish was exactly what the customer was looking for and they were very happy with the overall restoration of the floor. Another satisfied customer!

Professional Tile Repairing, Cleaning and Sealing for a Victorian Tiled Floor in Ulverston

Victorian Tiled Floor Cleaned and Sealed in Ulverston Read More »

Victorian Black and White Tiles Before After cleaning and sealing Windermere

Victorian Black and White Tiles Cleaned and Sealed in Windermere

1 Comment / Victorian Tile Cleaning, Windermere Tile Cleaning, Work History / Heidi Taylor

This job was at a house in near Windermere in South Cumbria, a place which is very popular amongst tourists to the Lake District. My client had a Black and White Victorian tiled floor in dire need of a clean and re-seal.

Victorian Black and White Tiles before cleaning and sealing Windermere

Cleaning a Victorian tiled floor

Prior to the application of any cleaning products, my first task was to run damp tests to make sure there were no inherent damp problems. With old floors of this type it’s good to know if there is a damp problem as this will affect the choice of sealer and also the length of time the floor requires to dry.

Fortunately, there were no damp issues present, and I was able to proceed however had the floor been damp and being December I would have offered to carry out the clean and seal in the Summer, when the water tables were lower and the damp levels would be more settled, thus creating a better environment for the sealer to operate in.

I started cleaning the Victorian tiles with Tile Doctor Remove & Go, a product which breaks down old sealers in preparation for a fresh seal to be applied. The product is diluted with water and then scrubbed into the floor with a scrubbing pad fitted to rotary machine; the resulting slurry is then removed using a wet vacuum.

Next step was to apply Tile Doctor Pro-Clean which was applied liberally to the floor, left to dwell for a short period and then agitated with a black scrubbing pad to lift out the ingrained dirt. I also paid special attention to cleaning the grout lines with a stiff scrubbing brush. The floor was then rinsed with clean water, and the resulting residue was extracted using a wet-vac machine.

Sealing a Victorian tiled floor

After the cleaning was completed, the tiles were left for a couple of days to allow them ample time to dry. Upon my return to the house I checked the damp levels again and then applied two coats of the impregnating, colour enhancing sealer Tile Doctor Colour Grow which gives the black tiles more depth of colour, along with the robust surface seal and Matt finish my client had requested.

Victorian Black and White Tiles after cleaning and sealing Windermere

My client was exceptionally pleased the results – but really, the photographs speak for themselves.

Professional Victorian Floor Restoration in the Lake District

Victorian Black and White Tiles Cleaned and Sealed in Windermere Read More »

Victorian Tiled Floor Windermere After Cleaning

Victorian Tiled Hallway Cleaned and Sealed in Windermere

Victorian Tile Cleaning, Windermere Tile Cleaning, Work History / Heidi Taylor

I recently paid a visit to Windermere in the Lake District to clean and re-seal a Victorian Tiled hallway floor. The customer wanted the shine putting back on the Victorian tile and some tile grout had become loose and needed replacing.

Victorian Tiled Floor Windermere Before Cleaning

Cleaning Victorian Floor Tiles

On arrival I set up my tools and covered any areas that needed protecting against water. Once that was done I started to strip the floor of any remaining sealer using Tile Doctor Remove and Go which is a coatings and sealer remover product that is safe to use on tile, stone and grout. Working in small areas the product was scrubbed into the tile and then washed it off with water using a wet vacuum to remove the soiled solution. This process was repeated until the whole floor was clean, there were a few stubborn areas and for these I mixed the Remove and Go 50/50 with Nano Tech Ultra Clean which adds tiny abrasive particles into the solution to make a more effective product. The process of scrubbing the floor made me realise that the loose grout problem was greater than first thought and some tiles need re-laying so I decided to come back and do this the next day, before leaving however I gave the floor a thorough rinse to ensure any trace of cleaning product was removed.

Grouting Victorian Tile

The next day I arrived and fixed all the loose tiles, my preference is to use the Mapei range of tile adhesives and grout, in fact the grout comes in a range of colours which is very useful if your filling in holes in travertine etc. One the adhesive had gone off I began to grout them in including those areas where the grout was missing or become loose. The last step was to wash off the grout from the tile surface and making sure it was all tidy for the next day.

Victorian Tiled Floor Windermere During Cleaning

Sealing Victorian Floor Tiles

On the third day I returned to the house and after verifying the floor was dry with a damp tester and the grout had hardened I started sealing the floor with Tile Doctor Seal and Go putting on thin coats which took about twenty minutes to dry, in total seven coats were applied which gave the floor the nice shine the customer was after.

This job took me three days in total and after I had finished we discussed how to maintain the appearance and increase the longevity of the sealer by using a Neutral Cleaning product which unlike many acidic cleaners does not eat away at the sealer.

NB..Reproduction Victorian Tiles can be difficult to source so if you’re looking for replacements contact www.KendalTileandStone.co.uk who stock a good range.

Cleaning and Sealing Victorian Tiles in Cumbria

Victorian Tiled Hallway Cleaned and Sealed in Windermere Read More »

=================================

Ambleside Tile Cleaning, Arnside Tile Cleaning, Ceramic Tile Cleaning, Crook Tile Cleaning, Encaustic Cement Tile Cleaning, Fireplace Cleaning, Flagstone Tile Cleaning, Grange-Over-Sands Tile Cleaning, Grasmere Tile Cleaning, Grout Cleaning, Kendal Tile Cleaning, Kirby Stephen Tile Cleaning, Levens Tile Cleaning, Limestone Tile Cleaning and Polishing, Marble Tile Cleaning, Milnthorpe Tile Cleaning, Porcelain Tile Cleaning, Quarry Tile Cleaning, Sandstone Tile Cleaning, Sedbergh Tile Cleaning, Shap Tile Cleaning, Slate Tile Cleaning, Terracotta Tile Cleaning, Terrazzo Floor Cleaning, Travertine Tile Cleaning, Ulverston Tile Cleaning, Victorian Tile Cleaning, Vinyl Tile Cleaning, Windermere Tile Cleaning, Work by Category, Work by Location, Work History / Heidi Taylor

South Cumbria Tile Doctor

================================= Read More »